Tired of spending money on bottled water? An alkaline water system is a game-changer, providing pure, high-quality water directly from your kitchen. Not only does it save money, but it also ensures your family has access to safe and healthy water. In this guide, we’ll walk you through the installation process of the Halo alkaline water system, a trusted solution for homeowners.
Why Choose the Halo Alkaline Water System?
The Halo alkaline water system offers numerous benefits:
- Leak Protection: Built-in drip tray with leak detection shuts the system off if moisture is detected, preventing cabinet damage.
- Efficiency: A one-gallon use to one-gallon waste ratio saves water and minimizes waste.
- Chemical Removal: Removes harmful chemicals like PFAS (“forever chemicals”) and other contaminants.
Installation in 10 Easy Steps
1. Check the Parts and Layout
- Verify all components are included: hoses, adapters, drain connections, and filters.
- Lay out the system under your sink to ensure everything fits and is accessible for future filter changes.
2. Install the Faucet
- If your sink has a pre-existing hole, use it. Otherwise, drill a new hole for the faucet.
- Align the faucet for proper placement and secure it firmly.
3. Connect the Blue Hose to the Faucet
- Identify the correct blue hose (post-filter line).
- Attach it securely to the faucet to ensure clean water flow.
4. Install the Leak Control Valve
- Ensure the valve is in place and the compressed textile disc is installed.
- This valve will activate and shut off the system if moisture is detected.
5. Install the Drain Saddle
- Locate the best spot on your drainpipe and drill a quarter-inch hole for the drain connection.
- Attach the drain saddle, ensuring it aligns with the hole, and secure it tightly.
6. Position the Tank
- Place the tank in the cabinet, ensuring the valve is accessible for future maintenance.
7. Mount or Place the RO System
- You can mount the reverse osmosis (RO) system to the wall or leave it freestanding for easier filter changes.
8. Connect the Adapter to the Cold Water Line
- Attach the adapter to the cold water supply under the sink.
- Reconnect the faucet supply line to the adapter, ensuring no leaks.
9. Turn On the System and Check for Leaks
- Slowly open the water supply valve and watch for leaks at every connection point.
10. Flush the System
- Allow the tank to fill completely (approximately four hours).
- Open the faucet to flush out the system, discarding the initial water to remove any preservatives or debris.
Features That Make the Halo System Stand Out
- Battery-Operated Status Indicator: Flashes blue when the system is working correctly and turns red when it’s time to change the filter.
- Simple Maintenance: The system is designed for easy filter replacements without specialized tools.
- Compact Design: Fits neatly under most kitchen sinks, with minimal loss of cabinet space.
Final Thoughts
The Halo alkaline water system is a simple, effective solution for clean and healthy water at home. Installation is straightforward, taking just a few hours to complete. Once installed, you’ll enjoy high-quality water while saving money on bottled alternatives.
If you’re ready to upgrade your water system, visit Halo Water to learn more about their products and find a system that works for you.
